Jeep Gladiator Rear High N Tight Rear Bumper. High Clearance Gladiator Bumper
Jeep Gladiator High Clearance Rear Bumper with D Ring Shackle Tabs Jeep JT Gladiator Rear High Clearance Bumper Simple Bolt on installation. This high clearance bumper is designed to reduce the Gladiator’s tendency to drag the rear bumper off road giving many inches of gained clearance over stock and aftermarket bumpers. Tight to the tailgate, low profile high from the ground. If you wheel your gladiator, this is the bumper for you. Receiver option is Jeep backup sensors/park assist compatible. INSTALLATION TIME 1-2 HOURS *Bumpers with welded seams (not sanded/ground) ready for contour grinding and/or paint/powder coat to your specific color. Some images may be shown with installer contour ground welds. *Optional Black Powder Coat available (with welded non ground seams) *Standard Bumper is Not compatible with Jeep Park Assist Back Up Sensors. (Will work on park assist equipped vehicles, park assist will be disabled). *Receiver Option (2”) is currently NOT RATED FOR TOWING. (Used for Recovery and/or Bike Racks, Kayak Mounts, Baskets and other accessories) Factory Spare Tire will be unaffected Optional JT License Plate Relocate sold separately EVO-3121B On Rubicon: Rear Corner Guard can be installer trimmed/capped (as seen in pictures) or removed. Powdercoated bumpers are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier products are also available in raw metal for local treatment specific to your area needs.
Similar parts
Jeep Gladiator JT Rock Skins Set - ADHESIVE / BOLT ON -
EVO Jeep Gladiator Rock Skins compliment our Rock Sliders adding more protection to the bottom rocker panel of your JLU. OPTIONS: ADHESIVE- 3M adhesive to bond Rock Skins to your Jeep. Installer applied. BOLT ON- Traditional Bolt on Style Rock Skins. Requires drilling into vehicle body. Light Weight and Corrosion Resistant Aluminum
GATE PLATE (BLACK) JK/JKU
EVO MFG Jeep JK Gate Plate 2 piece system Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK (Fits both wide and tall tailgate vents without removal) Powder coated for clean finish and corrosion protection Easy install using factory hardware
2007-2011 Jeep Wrangler PROTEK SKID SYSTEM (AUTO TRANSMISSION) JK/JKU
EVO Protek Skid System Complete Kit, 07-11 Auto Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1102B EVO MFG 2007-2011 JK 3.8L Transmission Skid (Auto) BLK 100% Bolt on with factory hardware. Powder coated black. EVO-1103B EVO MFG 2007-2011 JK 3.8L Skid Connection BLK Requires Oil and Transmission skid to mount 3/16” Steel Skid 100% Bolt-on with supplied hardware Bridges gap between Oil Pan Skid and Auto Transmission Skid Powder coated black EVO- 1093B EVO MFG TransCross-member Exhaust Skid 2007-2015, BLK Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs, Protects the expensive to replace factory transmission cross-member, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black Notes: EVO-1093B not compatible with Long Arm Kits. INSTALLATION TIME 3.5-7 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Jeep Parts