QUARTER POUNDER FRONT WINCH BUMPER FOR JEEP WRANGLER & GLADIATOR JK/JL/JT
JEEP WRANGLER JL, JLU, JK, JKU & JT GLADIATOR FRONT WINCH BUMPER Jeep Wrangler Gladiator Front High Clearance Winch Bumper High Clearance, Military Inspired, Ultra High Strength Front Bumper for the Wrangler JK/JKU, JL/JLU and Gladiator JT. Features: ¼” Steel Construction. Precision Laser Cut and CNC Bent. Deeply Recessed Winch Mounting Location for efficient vehicle cooling. Two Front Hi-Lift Jack Points Integrated In. 2” of gained front ground clearance for increased approach angle. Narrow width to effectively clear large tires at full turn and articulation. Proudly Made in the USA EVO Military Style Front Winch Bumper If installing bumper without D Ring Shackle mounts, or Stinger, mounting hardware will be needed: EVO-770015 (sold separately). If installing with D Ring Shackle Mounts or Stinger, Hardware is included to mount both bumper and accessory item to your vehicle in the accessory item. When optioned with Dring or Stinger. This bumper combo is often used for flat tow/ tow bar. Consult your tow bar manufacturer for applications/ratings. 3/4” tabs with 1” pin/hole Jeep Gladiator Lifted in Oregon Forest Jeep Mojave vehicle will require installer to relocate Shock reservoirs no provisions are provided to achieve this Steel 1/4 Pounder weight is approximately 70 lbs Aluminum 1/4 Pounder Weight is approximately 40 lbs Powdercoated bumpers are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier products are also available in raw metal for local treatment specific to your area needs.
Similar parts
Jeep Gladiator JT Rock Skins Set - ADHESIVE / BOLT ON -
EVO Jeep Gladiator Rock Skins compliment our Rock Sliders adding more protection to the bottom rocker panel of your JLU. OPTIONS: ADHESIVE- 3M adhesive to bond Rock Skins to your Jeep. Installer applied. BOLT ON- Traditional Bolt on Style Rock Skins. Requires drilling into vehicle body. Light Weight and Corrosion Resistant Aluminum
GATE PLATE (BLACK) JK/JKU
EVO MFG Jeep JK Gate Plate 2 piece system Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK (Fits both wide and tall tailgate vents without removal) Powder coated for clean finish and corrosion protection Easy install using factory hardware
2007-2011 Jeep Wrangler PROTEK SKID SYSTEM (AUTO TRANSMISSION) JK/JKU
EVO Protek Skid System Complete Kit, 07-11 Auto Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1102B EVO MFG 2007-2011 JK 3.8L Transmission Skid (Auto) BLK 100% Bolt on with factory hardware. Powder coated black. EVO-1103B EVO MFG 2007-2011 JK 3.8L Skid Connection BLK Requires Oil and Transmission skid to mount 3/16” Steel Skid 100% Bolt-on with supplied hardware Bridges gap between Oil Pan Skid and Auto Transmission Skid Powder coated black EVO- 1093B EVO MFG TransCross-member Exhaust Skid 2007-2015, BLK Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs, Protects the expensive to replace factory transmission cross-member, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black Notes: EVO-1093B not compatible with Long Arm Kits. INSTALLATION TIME 3.5-7 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Jeep Parts