EVO MFG 2007-2011 JK 3.8L Transmission Skid (Auto) BLK 100% Bolt on with factory hardware. Powder coated black. Can be used independently or with entire system. Notes: Automatic Transmission Only INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

EVO MFG 2007-2018 Jeep Wrangler JK / JKU ProTek Rear Shock Skids The lower rear shock and control arm mount on the JK is the lowest and most vulnerable component for impact and damage while on the trail. The EVO MFG ProTek Rear Shock Skid gives the strength and protection needed to help protect your expensive and important suspension components. Fully bolt on with no required cutting or welding, this skid boxes in the rear control arm and shock mount with 3/16” steel and offers ramping flat skids to help you slide off obstacles and not get hang up. Comes with both driver and passenger sides skids, powder coated black for corrosion protection. DOWNLOAD PDF INSTRUCTIONS: EVO-1196B.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JL/Gladiator PRO Alumilite Hoop Jeep Wrangler JL/Gladiator PRO Alumilite Hoop DOWNLOAD PDF INSTRUCTIONS: EVO-3112AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

EVO MFG ProTek JK Exhaust Skid *Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs Protect the expensive to replace factory transmission crossmember 100% Bolt On with factory and supplied hardware Works on both Manual and Automatic JKs Powdercoated Black Notes: EVO-1093B not compatible with LONG ARM Kits (Weight: 30lbs) INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

EVO MFG Jeep JK Gate Plate Vent Delete Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK/JKU Texture powdercoated steel construction and easy install using factory hardware Factory Vent baffle removal required. Cabin will still vent Works with both wide and tall tailgate vents

EVO MFG 2007-2011 JK 3.8L Skid Connection BLK Requires Oil and Transmission skid to mount 3/16” Steel Skid 100% Bolt-on with supplied hardware Bridges gap between Oil Pan Skid and Auto Transmission Skid Powder coated black Notes: Requires EVO-1101B and EVO-1102B to mount, Optional Equipment, Automatic Transmission only INSTALLATION TIME 0.5-1 HOUR WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

EVO-3161B Jeep Wrangler 392 & Gladiator Mojave A Pillar Cowl Ditch Light Mounts, Pair Black Simple bolt on install to 2018-2024 Jeep Wrangler 392 and 2020-2024...

EVO 4 Door RockSliders, Raw EVO MFG RockSliders are manufactured from 3/16-inch laser-cut steel plate and 1.75OD x .120 DOM Tubing. They weld on to the factory frame of the JK to protect the sides and under body from trail damage. The EVO RockSliders are strong enough to support the weight of the vehicle and can be used as a jacking point for a Hi-Lift Jack. The EVO RockSliders offer a sleek, low profile design that will compliment and protect 4 Door Jeep Wrangler JKs. EVO MFG RockSliders are available in bare steel so they can be paint-matched to your vehicle once installed. **** Sliders ship bare metal with welded seams ready for contour grinding and/or paint. *** • Proudly Made in the USA • Manufactured from 3/16-inch laser-cut steel plate, 1.75OD x .120 Wall DOM Tubing • Designed to protect the JK’s stock body panels • Weld-on installation • Designed to work with all Short Arm Suspension kits without Modification Note: EVO 4 Door Sliders work with EVO Long Arm kit.

EVO MFG 2012-2018 HD ProTek Transmission Crossmember JK (RAW) The factory JK Transmission crossmember is weak and volernable to damage being that it is mostly unprotected and the lowest part of the chassis. It is also expensive to replace with factory components. The EVO MFG HD Crossmember addresses this with a 3/16” plate steel construction, laser cut and CNC formed alternative the is significantly stronger and much more cost effective than a factory replacement. Best of both worlds, Cheaper and stronger. Its shape is the same as factory and includes all threaded inserts for retention off all factory and aftermarket skid plates. Fully boxed constuction for 2012+ model year Jeep Wrangler JK/JKU Section welded to keep a truer part, minimizing heat warp Easy install, No cutting or drilling required Raw finish INSTALLATION TIME 1-2 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1145.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JL/Gladiator PRO Front Alumilite Bumper Skid Jeep Wrangler JL/Gladiator PRO Front Alumilite Bumper Skid DOWNLOAD PDF INSTRUCTIONS: EVO-3114AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.