Designed for 50” straight lightbar 7-gauge, powder coated steel Includes gaskets and mounting hardware Sold as a pair

Mounts 2 sets of cube lights in post location 7-gauge, powder coated steel Includes gaskets and mounting hardware Sold as a pair

Upgrade your Jeep’s headlights to 7” Chasing LEDs. The headlights have an output of 3000 lumens for the high beam and 1900 lumens for the low beam. The durable polycarbonate lens cover makes this an ideal solution for adventurous Jeep® owners. Along with the Heise Connect Controller, these headlights offer more than 170 pre-programmed modes for patterns with 16 million different colors. The controller has two wireless control options; an included remote control or a free app for a smartphone or tablet, allowing users to change colors, sync to music, and more. This lighting set also works with other Heise Chasing lighting products, allowing an entire system to use the same app and remote. Features: 7” Premium chasing LED sealed headlights 49 watts each Lumen 3000lm (high beam), 1900lm (low beam) Color temperature: 6500K Material: die-cast aluminum alloy housing Lens: polycarbonate IP rating: IP67K Operating voltage: 12V Operating temperature: -40?F to 140?F HE-CHASEVL-CB Heise Connect low voltage controller H4 to H13 connectors included HE-REMOTE RF card remote App controlled Chasing lights are for off-road use only and are not for use on public roads Heise Connect Chasing Controller Features: Addressable LED controller 170+ color-changing patterns Turn signal function (both left and right) Brake function DIY pattern function Music sync function App controlled (Heise Connect app) HE-REMOTE RF card remote Max load 10A Can be grouped in the app with any Heise Connect controller (RGB, RGBW, and Chasing)

Mount locations for 4 cube lights 7-gauge, powder coated steel Includes gasket and mounting hardware Excludes special edition models with raised hoods Sold individually

Mounts with factory hardware Coverts any JP-xxx 4" fog light to a direct bolt-on for Wrangler JL Sport Brackets marked for Left and Right sides, and Top for easier orientation Durable ABS construction Lights sold separately Sold as a pair

Designed to replace the LVDS camera on Jeep Wrangler RCA output for aftermarket radios or monitors Can be viewed while driving with compatible monitor Improved power circuit Direct OE replacement ABS housing Resolution: 550 TV lines Selectable parking lines 160° viewing angle IP68 water-resistant 3-year warranty

ABS speaker adapter plates (pair) Speaker adapter harnesses (pair) One convenient package to assist in replacing a pair of speakers Designed for installation of 4"; x 6" speakers

Allows 7” LED headlights to fit into Jeep Wrangler JL 2018-up models Includes factory to H4 wiring adapters Solid steel construction 3 points of beam adjustment Gaskets included Sold as a set of 2 brackets with 2 harnesses Headlights sold separately

iBEAM Vehicle Safety Systems® by Metra Electronics® has just released a new replacement camera designed for 2020-up* Jeep® Gladiator JT models. When replacing the radio on these vehicles, the factory LVDS backup camera presents a challenge for aftermarket screens and can be expensive to retain using an interface. iBEAM’s JP-JTKT camera replaces the factory camera to provide an affordable solution that allows the driver to see their backup video on a compatible aftermarket screen when in reverse. This new solution adds to Metra’s growing product line of aftermarket Jeep® accessories. The JP-JTKT has an RCA output for aftermarket radios or monitors with selectable parking lines and a 160-degree viewing angle. Two different types of camera mounting brackets are available to cover models equipped with either a standard backup camera or models equipped with surround or 360 systems. (Surround or 360 systems are not retained with this kit.) To help with installation, the camera comes with detailed instructions. Direct OE replacement camera for 2020-up* Jeep® Gladiator JT Resolution: 550 TV lines Viewing angle: 160° Rated IP68 High-performance power circuit Camera extension cable included (26ft length) Two types of ABS mounting brackets included 1 year limited warranty

Mount 1 LED whip light to spare wheel carrier 7-gauge, powder coated steel

Fits a cube, work or driving light 7-gauge, powder coated steel Includes gaskets and mounting hardware Sold as a pair

Mount 1 LED whip light to spare wheel carrier 7-gauge, powder coated steel

Upgrade your Jeep’s headlights to 9” Chasing LEDs. The headlights have an output of 4300 lumens for the high beam and 2100 lumens for the low beam. The durable polycarbonate lens cover makes this an ideal solution for adventurous Jeep® owners. This is a complete headlight replacement kit and does not require additional brackets for installation. Along with the Heise Connect Controller, these headlights offer more than 170 pre-programmed modes for patterns with 16 million different colors. The controller has two wireless control options; an included remote control or a free app for a smartphone or tablet, allowing users to change colors, sync to music, and more. This lighting set also works with other Heise Chasing lighting products, allowing an entire system to use the same app and remote. Features: 9” Premium full replacement chasing LED sealed headlights 64 watts each Direct bolt-on replacement Plugs into OE harness Lumen 4300lm (high beam), 2100lm (low beam) Color temperature: 6500K Material: reinforced polypropylene housing Lens: polycarbonate IP rating: IP67K Operating voltage: 12V Operating temperature: -40?F to 140?F HE-CHASEVL-CB Heise Connect low voltage controller HE-REMOTE RF card remote App controlled Chasing lights are for off-road use only and are not for use on public roads Heise Connect Chasing Controller Features: Addressable LED controller 170+ color-changing patterns Turn signal function (both left and right) Brake function DIY pattern function Music sync function App controlled (Heise Connect app) HE-REMOTE RF card remote Max load 10A Can be grouped in the app with any Heise Connect controller (RGB, RGBW, and Chasing)

Kit includes multi-adjustable bracket, camera and wiring Bracket mounts to factory studs of spare wheel Camera provides parking guidelines Bracket adjusts up and down on the studs and the camera stem adjusts side to side, and up and down iBEAM recommends the TE-CAMFLTR be used if power is being connected via the tail light. (sold separately)

Elevate the lighting on select Jeep® vehicles with these stylish 4-inch LED fog lights with RGB halo. Designed to fit 1997-Up* Jeep® Wrangler and 2020-Up* Jeep® Gladiator, these lights come with a Heise Connect RGB controller that allows users to easily control their RGB lighting from the palm of their hand when paired with the Heise Connect downloadable app for smartphones or tablets. A durable polycarbonate lens and die-cast aluminum alloy housing make these fog lights an ideal lighting solution for adventurous Jeep® owners, and they work cohesively with all Heise RGB lighting as part of the Heise Connect Universe (HCU). Features: Pair of 4” LED fog lights Fits 1997-Up* Jeep® Wrangler and 2020-Up* Jeep® Gladiator 60 watts total (30 watts each) Lumens: 1020lm each Color temperature: 6500K Housing material: Die-cast aluminum alloy Lens: Polycarbonate IP rating: IP67 Operating voltage: 12V Operating temperature: -40?F to 140?F Heise Connect RGB controller included Standard 9145 connector 3-year warranty Visit Metraonline.com for more detailed information about the product and up-to-date vehicle specific applications. Heise Connect RGB Controller HE-RGB-CB This controller is specifically designed to work with Heise RGB Lighting, making customization and control of these products easy. This controller features two wireless control options; an included remote control or using the Heise Connect downloadable app for smartphone or tablet. Users can easily group multiple controllers through the app, and every controller has left and right zones for independent turn signal control wires and a dedicated brake light trigger wire. This product works with all pre-existing Heise RGB products. 24 color-changing patterns Turn signal function (both left and right) Brake function DIY pattern function Music sync function App controlled (Heise Connect app) or via the included RF card remote Max load 10A Water-resistant Heise connector Heise Connect App The Heise Connect app allows users to remotely control Heise LED lighting products from the palm of their hand. The app automatically connects via Bluetooth® and detects the type of control box connected to the app; RGB, RGBW, or Chasing, allowing groups of all products to be used and controlled within the same mobile app. A selectable color wheel lets users choose from 16 million RGB color options and a true white light color option available with RGBW products. Users can also select from 24 pre-programmed patterns for RGB and RGBW and 170+ pre-programmed moving patterns for Chasing. There is also a DIY pattern option for Chasing products that allows for selecting up to 16 colors and 3 motion effects. The app also features independent left and right turn signal triggers, a brake trigger, and a music sync function.